Alain Lauzon2022-10-14T10:39:41-04:00If you didn’t drive your motorcycle all winter, the first thing to do is change the fuel. Gasoline gets stale when it sits in the tank too long. Use a siphon pump to get rid of any old gas, and then fill the tank with fresh fuel.
2 – Change the oil
Alain Lauzon2022-10-14T10:39:59-04:00Just as you need clean fuel, you also need to change the oil and replace the oil filter before you take your bike out for your first ride. Neglecting this step can affect the performance and longevity of your motorcycle.
3 – Check the battery life
Alain Lauzon2022-10-14T10:40:13-04:00Some riders disconnect their motorcycle batteries for the winter and recharge them every month or two. Once you reconnect the battery, you’re probably ready to roll. However, if it’s been sitting all winter long, you might have a dead battery on your hands. If it’s a fairly new battery, charging it up is fine. If it’s three or four years old, you may find it doesn’t keep a charge, or you might have a hard time charging it. In that case, you’re probably better off purchasing a new battery and playing it safe.
4 – Check your tires
Alain Lauzon2022-10-14T10:40:25-04:00Tires are some of the most important parts of any vehicle, so they deserve your time and attention. Check their air pressure to make sure it’s at a safe level for riding. You’ll also want to check your tread to determine if it’s still got enough depth to offer you sufficient traction. If your air pressure and tread are all set, then just look for any cracks or rot in the sidewall of the tires before moving on.
5 – Inspect your chain
Alain Lauzon2022-10-14T10:40:40-04:00Your bike’s chain is one of its most critical components, but constant exposure to the elements can cause it to deteriorate or become loose. Check it to ensure it’s still tight and well-lubricated. You may need to clean the chain and reapply lubricant.
6 – Get plenty of fluids
Alain Lauzon2022-10-14T10:40:55-04:00Oil and gas aren’t the only fluids your motorcycle depends on. Brake fluid and coolant are important for motorbike maintenance, but they can sometimes leak if your bike is left standing for a long period of time. Double-check your levels and refill or top them off. Or, flush out the old fluids and replace them with fresh fluids.
7 – Don’t forget your cables
Alain Lauzon2022-10-14T10:41:17-04:00Oil and grease in your cable housing can dry up over time, and that can affect the performance of your clutch and throttle. Inspect your clutch, brakes, throttle, choke, and any other cables to ensure they’re still responsive and not frayed.
8 – Make your bike shine
Alain Lauzon2022-10-14T10:41:30-04:00As a final step, make sure you give your motorcycle a thorough cleaning. Not only does it protect your paint and make your bike look fantastic, but cleaning your bike frequently keeps it in better working condition
